Turntables

Reference
reference_turntable
The current Reference turntable employs a low-speed, recoil start synchronous motor on a single spring mounting driving the platter via a neoprene belt, thereby providing complete vibration insulation. The main bearing is manufactured from high-grade aluminum with two pressed fit P.T.F.E bushes at either end of the housing ensuring minimum contact with the bearing spindle, which it self comprises of a silver steel shaft and aluminum hub running on to a ceramic ball bearing. Platter speed is determined by the A.C mains frequency, which is effectively constant and is powered by a separate linear power supply. Speed changing is accomplished by moving the drive belt from one motor pulley to the other. Tonearm packages are available at extra cost.

image1(1)

Specifications

  • Platter 305mm diameter machined from a solid billet of aluminum, finish is matt black and fitted with six aluminum inertia platter weights. The record is supported on neoprene pads, thereby reducing rumble and induced static to an absolute minimum.

  • Plinth 30 mm clear acrylic.
  • Isolation Feet Aluminum fitted with cork/rubber damping pads.
  • Lid Clear acrylic.
  • Main bearing Slim sectioned ball-ended ground and polished silver steel spindle running onto a ceramic ball bearing and hardened steel thrust plate.

  • Motor Single-phase AC synchronous, recoil start.

  • Tonearm Origin Live Onyx Tonearm
  • Tonearm Boards Available for most new and classic arms.
  • Power requirement 115vac or 240vac, single-phase, 50 Hz or 60Hz.
  • Speeds 33.3 and 45 r.p.m.

reference_002

Dimensions

  • 440 mm x 420 mm x 520 mm ( lid open )
  • 440 mm x 420 mm x 170 mm ( lid closed )

Transcriber

Transcriptors Transcriber Turntable

Designer David Gammon
Model Transcriber
Model Transcriber
Country of origin Carlow, Ireland
Date Of manufacture 1977 – 1981

Round Table

Transcriptors Round Turntable

Designer David Gammon
Model Round Table
Country of origin Carlow, Ireland
Date Of manufacture 1975


Skeleton

Transcriptors Skeleton Turntable

Designer David Gammon
Model Skeleton
Country of origin Carlow, Ireland
Date of manufacture 1973 – 1977


Saturn

Transcriptors Saturn Turntable

Designer David Gammon
Model Saturn
Country of origin England/Carlow, Ireland
Date Of manufacture 1968 – 1971


Hydraulic Reference

Transcriptors Hydraulic Reference Turntable


Designer
David Gammon

Model Hydraulic Reference
Country of origin Borehamwood, England
Date Of manufacture 1964 – 1973


Reference

Reference TurntableDesigner David Gammon
Model Reference
Country of origin England
Date Of manufacture 1963 – 1964